Kamis, 03 Maret 2011

UTP

UTP merupakan singkatan dari Unshielded Twisted Pair yaitu kabel jaringan yang tidak memiliki shield atau pelindung dan mempunyai 4 pair atau pasangan kabel yang di twisted atau dipuntir. Jadilah namanya Unshielded Twisted Pair. Karena tidak memiliki pelindung kabel UTP jadi kurang tahan terhadap interferensi elektromagnetik. Keempat pasang kabel tersebut mempunyai warna yang masing-masing pasangannya terdiri dari warna yang sama dan satunya putih dan warna tersebut. Warnanya adalah putih orange dan orange, putih hijau dan hijau, putih biru dan biru, serta putih coklat dan coklat.
Kabel UTP merupakan kabel yang populer dalam instalasi jaringan karena harganya yang murah, mudah didapat dan instalasi yang praktis. Untuk menghubungkan kabel UTP dengan Lan card diperlukan konektor khusus yaitu RJ-45 (Registered Jack). Ada satu lagi konektor RJ yaitu RJ11 yang digunakan untuk menghubungkan dengan konektor di telepon.
Kabel UTP biasa digunakan untuk menghubungkan jaringan LAN.
Ada 2 susunan kabel UTP, yaitu straight through dan crossover. Kabel straigt digunakan untuk menghubungkan perangkat yang tidak sejenis seperti PC dengan switch dll. Kabel cross digunakan untuk menghubungkan perangkat yang sejenis seperti hub dengan hub, PC dengan PC, dll. Susunan kabel straight dan cross memiliki susunan yang berbeda.
Kabel straight disusun seperti berikut : putih orange – orange – putih hijau – biru – putih biru – hijau – putih coklat – coklat. Kedua ujungnya memiliki susunan yang sama. Susunan tersebut menggunakan standar TIA568(Telecommunication Industry Association) atau Electronic Industries Alliance (EIA568).
Sedangkan kabel cross, Ujung pertama Kabel cross disusun seperti susunan kabel straight namun ujung satuya disusun seperti ini: putih hijau – hijau – putih orange – biru – putih biru – hijau – putih coklat – coklat. Susunan ini menggunakan aturan TIA/EIA568A dan TIA/EIA568B.
Pin yang paling penting adalah pin nomor 1, 2, 3, dan 6. Pin tersebut berfungsi sbb:
Pin 1 sbg Tx+ yaitu transfer data
Pin 2 sbg Tx- yaitu transfer data
Pin 3 sbg Rx+ yaitu received data
Pin 6 sbg Rx- yaitu received data
Sedang pin lain, yaitu pin 4, 5, 7 dan 8 tidak terpakai dan digunakan untuk mengirim daya listrik (power over Ethernet) untuk mencatu perangkat yg ada di ujung kabel UTP.



Minggu, 20 Februari 2011

On the Job Training Report

So long time I didn't post something in here. Cause of my activities. The job training and the other tasks... So, I got some task from my teacher to make the Job training report. So, I got something to post to fill this blog! Hhe..
 I would like to say thanks to God that has given us his mercy. So, I can finish this report correctly. It contain the things that I’ve done and about the whole experience at the company.
 My OJT started on August 23, 2010 and end on October 9 2010. For this period, the 4th period I got to do my Job training on Prima Computer Demak. It addressed in Sultan Fatah St. No. 37 Demak. Prima Computer is a place of computer service, computer shop, maintenance, networking computer accessories etc.  For the month and a half that I’ve been working there, I can say that I am learning a lot of things… Not just in the field of Computer Science but also real life.

Everyday, I go there from Jepara at 5.30 am. and arrive in Demak at 7.15 am. Go home at 4.00 pm and arrive home at about 5.30 pm. I went there by bus. I did my job training there just alone.


On the early part of my job, I was assigned as a technician’s assistant the manager trained me to help the technician and the other employees. On my job training I had to do some tasks. Like install the computer, notebook, net book etc. Usually the costumers bring some trouble or problem with their PC and we fix it, troubleshoot the problem. I began my work with installed some software on new laptops. I installed some software like Microsoft Office, Winamp, WinRar, PDF Reader, etc.

The biggest costumer’s problem is about virus. Usually the virus makes some program broken. So, we have to reinstall the computer’s program. But, before install the operating system we have to backup the data to prevent losing important data. For your information, if you want to save your data just save it in drive D: or out of system disk. So, if your computer’s system broken you wouldn’t worry about your important data.  

There are so many problems about computer. One time the monitor didn’t display anything or blank. So, the first time we check is the VGA cable and make sure it’s right. If it’s not work, we open the casing and clean the memory or RAM with eraser. If still not work we should change the VGA card.

Troubleshoot printer. There are many kinds of printer like laser jet, bubble jet etc. And many trademark like Canon, HP, Epson, etc. The problems like blinking, paper jam, empty tank. If the printer blinking for sometimes maybe we should reset it. We could reset the printer by hard reset or used resetter software.   

                      
 I learned a lot from my experiences as an On-the-Job Trainee of Prima Computer. More than any learning thought in school, I learned to be with others, to work with people. The every day experiences I had in this company are really  treasured. The knowledge I obtain here are beyond compare than any other experiences I got from school and learned from books. What I had here will always be with me and I will apply what I’ve in every circumstance that I may encounter after these.

Furthermore, I’m very grateful that they expose me so much on what I must know regarding the work which suits my course. I’m very thankful that they treat me like them and they trust me with my work. I appreciate so much the working environment I had with in the company because it helps me absorbed what I need to know.


By     : Noviana Kus
Class : XII TKJ2
TOEIC LEVEL 1

Rabu, 10 November 2010

Menginstall XAMPP di Linux

Untuk membuat sebuah webserver kita memerlukan aplikasi webserver. Seperti xampp, zerus, sun java microsystem, atau sebagainya. Dan sistem operasi teraman adalah dengan menggunakan Linux.  Di bawah ini saya sampaikan cara menginstall lampp / xampp di linux :

Pastikan kamu memiliki file xampp biasanya berformat .tar.gz contoh xampp-linux-1.7.tar.gz bisa kamu download dari web xampp atau kopi dari temen.
1. Langsung masuk ke terminal dan jadilah superuser dgn memerintahkan sudo su lalu masukkan kata kunci.
2. Ekstrak xampp di folder /opt. Perintahnya = sudo tar -zxvf (nama_paket) -C /opt
3. Proses ekstraksi akan berlangsung, kalo berhasil say yea! Alhamdulillah ^_^
4. Berhasil menginstall xampp lalu aktifkan service nya= sudo /opt/lampp/lampp start
5. Untuk mengakhiri  service perintahkan = sudo /opt/lampp/lampp stop
Selamat mencoba!
Perlu diperhatikan: dalam menginstal/mengekstrak sebuah file, yang paling penting adalah source atau asal dimana file itu berada dan mau diekstrak kemana. Misal kita mempunyai master xampp-linux-1.7.tar.gz di harddisk D: yang namanya Data di folder lampp maka kita ketikkan nama paket dengan: /media/Data/lampp/xampp-linux-1.7.tar.gz dan diikuti perintah selanjutnya.

Rabu, 08 September 2010

Logo TKJ2 Versiku >> novianaktkj2

Ini dia logo TKJ 2 buatanku ASLI! Walaupun sederhana tapi sedikit bermakna ats perjuanganku membuatnya. HehHe!

Soal Jaringan Komputer

1.Macam2 jaringan komputer berdasarakn area/tempatnya

A. LAN (Local Area Network)
B. MAN (Metropolitan Area Network)
C. WAN (Wide Area Network)
D. PAN (Personal Area Network)
E. CAN (Campuss Area Network)
F. GAN (Global Area Network)


2. Network Address merupakan address khusus yang digunakan untuk mengenali suatu network pada jaringan internet.


3. Repeater merupakan alat yang berfungsi untuk memperkuat sinyal dengan menerima sinyal dari suatu kabel LAN lalu melanjutkan kembali ke kabel LAN yang lain.


4. Netmask merupakan address yang digunakan untuk melakukan masking/ filter pada proses pembentukan routing supaya kita cukup memperhatikan beberapa bit saya dari total 32 bit IP Address.


5.Jaringan komputer yang paling umum digunakan merupakan jaringan dengan kelas C.


6. Layer yang ada pada TCP/IP:

a. Application Layer
b. Transport Layer
c. Internet Layer
d. Network Accesss Layer
e. Physical Layer


7. Model networking public

a. TCP/IP (Transmission Control Protocol/Internet Protocol)
b. OSI (Open System Interconnection)

8. Layer dalam model jaringan OSI

a. Application Layer
b. Presentation Layer
c. Session Layer
d. Transport Layer
e. Network Layer
f. Data link Layer
g. Physical layer